Download Jio F90M Flash File 2021(Latest)

Hello Jio users, Welcome to – A safe tech helper. Are you want to download Jio F90M Flash file? then you are in the right place. And also Today I will show you the steps to flash Jio F90M Flash file.

Before going to the Flashing Process I want to say a little bit about myself, bye the way I am MD ILIAS, Expert in Mobile Software and Hardware field and always since 8 years.

In you will get all types of problems and solutions for your Smartphone and PC. We will provide you all the flash files, Stock ROM, Custom ROM, Flashing Tools, USB drivers, and many more.

Okay, Let’s going to the main topic, now we’ll flash Jio F90M Flash File to fix the Jio F90M Hang on Logo or Stuck On logo problem.

Jio F90M Specification:

I am not telling you that this is a good phone but this is the phone which can use all the classes of people. This phone supports 4G Volte HD voice calls, 4GB ROM, and 512MB RAM and it has the best type of CPU which is the Qualcomm 8905 Processer.

Screen Size2.4” LCD
Operating SystemKaiOS
And also its support YouTube, Facebook and many social site


Before starting the flashing, we should know about the requirements of flashing

  • A PC or Laptop to flash Jio F90M Flash File
  • A Best Quality Data cable.
  • Latest Flash File And Flash Tool.
  • And Obviously a JIo F90M Phone.

Download Required Files:

  • Jio F90M Flash File
  • Qualcomm USB drivers
  • Qpst Tool or Qfil Tool

Ready to Flash Jio F90M Flash File

Important Notes:

  • This tutorial is only for Jio F90M. Do not try with any other phone.
  • Make sure your phone has at least 50% charge.
  • After the flash Jio F90M Flash File, your whole data will erase so must take a backup before if you can take it.
  • Obviously, you have to read all the steps otherwise you can face a boot loop problem.

Steps to Flash Jio F90M Flash File

Now we are all set and ready to flash the Jio F90M Flash File. Just stay here and read the rest part of the flashing Jio F90M flash file.

Step 1:

Now extract all the downloaded files on your desktop with “WinRAR“. If you don’t have WinRAR installed then download it from here.

Step 2:

After that Open the “Qualcomm HS-USB QD-loader driver” folder and Double click on the “Qualcomm HS-USB QD-loader driver.exe” file and complete the installation.

Step 3:

Therefore, open “QPST” folder. Run the “Qpst.exe” file and complete the installation.

Step 4:

Before flashing restart once your “PC” for driver reorganization (It’s very important).

Step 5:

This is the time to take the main action, Go to “This PC”, open “(C:) Program Files(x86) > Qualcomm > QPST > bin“. Then look for “Qfil.exe” and double click on it.

Step 6:

Then click on “Load Content” and go to the Extracted folder for “Jio F90M Flash File” and select “content.xml” file.

Step 7:

This is the final step, at this time “Switch off your phone“. After that Press and hold “Arrow Up” and “Arrow Down“at a time both keys and connect to USB. Now your phone successfully connected with the PC in Emergency Download Mode. However, your invisible “Download content” button is visible now in the “Qfil flash tool. Now just click on the “Download” button.

It will take more than 4 to 5 minutes, Just relax and watch the flashing process. When It will complete just plug out the Jio F90M phone and press and hold the power key, wait a minute to complete the boot, and then finish the setup wizard.


These are all the steps to flash the Jio F90M Flash File. I hope, you successfully completed the flashing process. If you still getting an error or you have any query then just leave a comment below. I am here to help you in my best.

Thank you.

Leave a Comment